C Programming Interview Questions & Answers
1) How do you construct an increment statement or decrement statement in C?
There are actually two ways you can do this. One is to use the increment operator ++ and decrement operator --. For example, the statement "x++" means to increment the value of x by 1. Likewise, the statement "x --" means to decrement the value of x by 1. Another way of writing increment statements is to use the conventional + plus sign or - minus sign. In the case of "x++", another way to write it is "x = x +1".
2) What is the difference between Call by Value and Call by Reference?
When using Call by Value, you are sending the value of a variable as parameter to a function, whereas Call by Reference sends the address of the variable. Also, under Call by Value, the value in the parameter is not affected by whatever operation that takes place, while in the case of Call by Reference, values can be affected by the process within the function.
3) Some coders debug their programs by placing comment symbols on some codes instead of deleting it. How does this aid in debugging?
Placing comment symbols /* */ around a code, also referred to as "commenting out", is a way of isolating some codes that you think maybe causing errors in the program, without deleting the code. The idea is that if the code is in fact correct, you simply remove the comment symbols and continue on. It also saves you time and effort on having to retype the codes if you have deleted it in the first place.
4) What is the equivalent code of the following statement in WHILE LOOP format?
for (a=1; a<=100; a++)
printf ("%d\n", a * a);
Answer:
a=1;
while (a<=100) {
printf ("%d\n", a * a);
a++;
}
5) What is a stack?
A stack is one form of a data structure. Data is stored in stacks using the FILO (First In Last Out) approach. At any particular instance, only the top of the stack is accessible, which means that in order to retrieve data that is stored inside the stack, those on the upper part should be extracted first. Storing data in a stack is also referred to as a PUSH, while data retrieval is referred to as a POP.
6) What is a sequential access file?
When writing programs that will store and retrieve data in a file, it is possible to designate that file into different forms. A sequential access file is such that data are saved in sequential order: one data is placed into the file after another. To access a particular data within the sequential access file, data has to be read one data at a time, until the right one is reached.
7) What is variable initialization and why is it important?
This refers to the process wherein a variable is assigned an initial value before it is used in the program. Without initialization, a variable would have an unknown value, which can lead to unpredictable outputs when used in computations or other operations.
8) What is spaghetti programming?
Spaghetti programming refers to codes that tend to get tangled and overlapped throughout the program. This unstructured approach to coding is usually attributed to lack of experience on the part of the programmer. Spaghetti programing makes a program complex and analyzing the codes difficult, and so must be avoided as much as possible.
9) Differentiate Source Codes from Object Codes
Source codes are codes that were written by the programmer. It is made up of the commands and other English-like keywords that are supposed to instruct the computer what to do. However, computers would not be able to understand source codes. Therefore, source codes are compiled using a compiler. The resulting outputs are object codes, which are in a format that can be understood by the computer processor. In C programming, source codes are saved with the file extension .C, while object codes are saved with the file extension .OBJ
10) In C programming, how do you insert quote characters (' and ") into the output screen?
This is a common problem for beginners because quotes are normally part of a printf statement. To insert the quote character as part of the output, use the format specifiers \' (for single quote), and \" (for double quote).
11) What is the use of a '\0' character?
It is referred to as a terminating null character, and is used primarily to show the end of a string value.
12) What is the difference between the = symbol and == symbol?
The = symbol is often used in mathematical operations. It is used to assign a value to a given variable. On the other hand, the == symbol, also known as "equal to" or "equivalent to", is a relational operator that is used to compare two values.
13) What is the modulus operator?
The modulus operator outputs the remainder of a division. It makes use of the percentage (%) symbol. For example: 10 % 3 = 1, meaning when you divide 10 by 3, the remainder is 1.
14) What is a nested loop?
A nested loop is a loop that runs within another loop. Put it in another sense, you have an inner loop that is inside an outer loop. In this scenario, the inner loop is performed a number of times as specified by the outer loop. For each turn on the outer loop, the inner loop is first performed.
15) Which of the following operators is incorrect and why? ( >=, <=, <>, ==)
<> is incorrect. While this operator is correctly interpreted as "not equal to" in writing conditional statements, it is not the proper operator to be used in C programming. Instead, the operator != must be used to indicate "not equal to" condition.
16) Compare and contrast compilers from interpreters.
Compilers and interpreters often deal with how program codes are executed. Interpreters execute program codes one line at a time, while compilers take the program as a whole and convert it into object code, before executing it. The key difference here is that in the case of interpreters, a program may encounter syntax errors in the middle of execution, and will stop from there. On the other hand, compilers check the syntax of the entire program and will only proceed to execution when no syntax errors are found.
17) How do you declare a variable that will hold string values?
The char keyword can only hold 1 character value at a time. By creating an array of characters, you can store string values in it. Example: "char MyName[50]; " declares a string variable named MyName that can hold a maximum of 50 characters.
18) Can the curly brackets { } be used to enclose a single line of code?
While curly brackets are mainly used to group several lines of codes, it will still work without error if you used it for a single line. Some programmers prefer this method as a way of organizing codes to make it look clearer, especially in conditional statements.
19) What are header files and what are its uses in C programming?
Header files are also known as library files. They contain two essential things: the definitions and prototypes of functions being used in a program. Simply put, commands that you use in C programming are actually functions that are defined from within each header files. Each header file contains a set of functions. For example: stdio.h is a header file that contains definition and prototypes of commands like printf and scanf.
20) What is syntax error?
Syntax errors are associated with mistakes in the use of a programming language. It maybe a command that was misspelled or a command that must was entered in lowercase mode but was instead entered with an upper case character. A misplaced symbol, or lack of symbol, somewhere within a line of code can also lead to syntax error.
21) What are variables and it what way is it different from constants?
Variables and constants may at first look similar in a sense that both are identifiers made up of one character or more characters (letters, numbers and a few allowable symbols). Both will also hold a particular value. Values held by a variable can be altered throughout the program, and can be used in most operations and computations. Constants are given values at one time only, placed at the beginning of a program. This value is not altered in the program. For example, you can assigned a constant named PI and give it a value 3.1415 . You can then use it as PI in the program, instead of having to write 3.1415 each time you need it.
22) How do you access the values within an array?
Arrays contain a number of elements, depending on the size you gave it during variable declaration. Each element is assigned a number from 0 to number of elements-1. To assign or retrieve the value of a particular element, refer to the element number. For example: if you have a declaration that says "intscores[5];", then you have 5 accessible elements, namely: scores[0], scores[1], scores[2], scores[3] and scores[4].
23) Can I use "int" data type to store the value 32768? Why?
No. "int" data type is capable of storing values from -32768 to 32767. To store 32768, you can use "long int" instead. You can also use "unsigned int", assuming you don't intend to store negative values.
24) Can two or more operators such as \n and \t be combined in a single line of program code?
Yes, it's perfectly valid to combine operators, especially if the need arises. For example: you can have a code like " printf ("Hello\n\n\'World\'") " to output the text "Hello" on the first line and "World" enclosed in single quotes to appear on the next two lines.
25) Why is it that not all header files are declared in every C program?
The choice of declaring a header file at the top of each C program would depend on what commands/functions you will be using in that program. Since each header file contains different function definitions and prototype, you would be using only those header files that would contain the functions you will need. Declaring all header files in every program would only increase the overall file size and load of the program, and is not considered a good programming style.
26) When is the "void" keyword used in a function?
When declaring functions, you will decide whether that function would be returning a value or not. If that function will not return a value, such as when the purpose of a function is to display some outputs on the screen, then "void" is to be placed at the leftmost part of the function header. When a return value is expected after the function execution, the data type of the return value is placed instead of "void".
27) What are compound statements?
Compound statements are made up of two or more program statements that are executed together. This usually occurs while handling conditions wherein a series of statements are executed when a TRUE or FALSE is evaluated. Compound statements can also be executed within a loop. Curly brackets { } are placed before and after compound statements.
28) What is the significance of an algorithm to C programming?
Before a program can be written, an algorithm has to be created first. An algorithm provides a step by step procedure on how a solution can be derived. It also acts as a blueprint on how a program will start and end, including what process and computations are involved.
29) What is the advantage of an array over individual variables?
When storing multiple related data, it is a good idea to use arrays. This is because arrays are named using only 1 word followed by an element number. For example: to store the 10 test results of 1 student, one can use 10 different variable names (grade1, grade2, grade3... grade10). With arrays, only 1 name is used, the rest are accessible through the index name (grade[0], grade[1], grade[2]... grade[9]).
30) Write a loop statement that will show the following output:
1
12
123
1234
12345
Answer:
for (a=1; a<=5; i++) {
for (b=1; b<=a; b++)
printf("%d",b);
printf("\n");
31) What is wrong in this statement? scanf("%d",whatnumber);
An ampersand & symbol must be placed before the variable name whatnumber. Placing & means whatever integer value is entered by the user is stored at the "address" of the variable name. This is a common mistake for programmers, often leading to logical errors.
32) How do you generate random numbers in C?
Random numbers are generated in C using the rand() command. For example: anyNum = rand() will generate any integer number beginning from 0, assuming that anyNum is a variable of type integer.
33) What could possibly be the problem if a valid function name such as tolower() is being reported by the C compiler as undefined?
The most probable reason behind this error is that the header file for that function was not indicated at the top of the program. Header files contain the definition and prototype for functions and commands used in a C program. In the case of "tolower()", the code "#include <ctype.h>" must be present at the beginning of the program.
34) What are comments and how do you insert it in a C program?
Comments are a great way to put some remarks or description in a program. It can serves as a reminder on what the program is all about, or a description on why a certain code or function was placed there in the first place. Comments begin with /* and ended by */ characters. Comments can be a single line, or can even span several lines. It can be placed anywhere in the program.
35) What is debugging?
Debugging is the process of identifying errors within a program. During program compilation, errors that are found will stop the program from executing completely. At this state, the programmer would look into the possible portions where the error occurred. Debugging ensures the removal of errors, and plays an important role in ensuring that the expected program output is met.